Customized single girder 3 ton overhead crane

Unit Price:

USD 800.0000 - 2700.0000 / Set/Sets

Payment Type:

L/C,T/T,Paypal,Western Union

Incoterm:

FOB,CFR,CIF,EXW,FCA,CPT

Min. Order:

1 Set/Sets

Delivery Time:

30 Days

Contact Now

Basic Info

Model No.: LDC, LD, LDP, HD

Warranty: 12 Months

Place Of Origin: Henan, China

Brand: DGCrane

Duty Group: M3/M4

Application: Building Material Shops, Machinery Repair Shops

Certificate: ISO, CE, CUTR, SGS, BV

Power Source: 220V~480V

Lifting Mechanism: Wire Rope Hoist/Chain Hoist

Safety: Weight Overload Protection

Paint Color: Custom-sized

Additional Info

Packaging: Electric hoist is packed by plywood crate case, others are packed by non-woven fabrics

Productivity: 1500sets/month

Brand: DGCrane

Transportation: Ocean,Land,Air

Place of Origin: China

Supply Ability: 18000 sets/year

Certificate: ISO

HS Code: 84261120

Port: Qingdao Port,Tianjin Port,Shanghai Port

Product Description

Brief introduction for Customized single girder 3 ton overhead crane

A Single Beam Overhead Crane is an overhead bridge crane that has one bridge girder that supports the trolley and hoist. The trolley and hoist ride on the bottom flange of the bridge girder. The single beam ovehread crane is considered top running when the bridge girder rides on top of the runway beams.

Application: This crane is usually used indoors, such as workshop, plant, stockyard, etc. to lift goods. It is prohibited to use the equipment in the combustible, explosive or corrosive environment.

Solutions for different workshop conditions

Low headroom type single girder bridge crane

There are workshop with limited height from bracket to ground, but needs higher lifting height, then we will design the crane with square box girder and low headroom hoist, which will be with higher lifting height.

1ton overhead crane

Suspension type single girder bridge crane

For some workshop, there are concrete beams in the ceiling, but no columns. According practical needs, there needs an overhead crane, so we will suggest suspension type crane which hangs on the concrete beam if the roof can bear the weight enough.

1ton overhead crane

European type single girder bridge crane

For the workshop of high-tech products, or if you have requirement of low noise, the European type crane is recommended.

Side hanging type single girder bridge crane

In some workshop, the column height is limited, but there is much space from column top to ceiling. According to this condition, we will give side hanging type crane with side hanging hoist, which will make the lifting height higher.

Detailed Component Description

Production Flow

Incoming material test	Every batch of raw materials must be tested when they enter the factory. We set up a special testing room.It covers non-destructive inspection room, metallographic analysis and hardness inspection room, mechanics inspection and chemical inspection room. Testing methods has non-destructive testing,metallographic analysis, mechanical testing and chemical analysis, mainly testing and control of the raw materials, crane components, product
Uncoiling and flattening the steel plate	After uncoiling, leveling, sizing and shearing, the required length and width of the flat sheet can be obtained, which can protect the flat sheet without scars, high shearing accuracy, double palletizing and discharging, high efficiency and speed.
Uncoiling and flattening the steel plate
Pressure Groove	According to crane specifications to groove pressing with different model, and main girder forming at one time can realize that the U-groove of the whole main girder of single girder crane has no butt weld, thus reducing stress concentration point, improving the strength and stiffness of the main girder, and greatly improving the comprehensive bearing capacity of the main girder.
Welding Stiffener	There is a support which can keep the main girder be not deformed, and workers can work easily without bending.
Welding main beam with the ending
Welding I beam and ventral	Submerged arc welding (SAW) is a kind of protective welding with Rohm double gun automatic welding, which has the advantages of full weld, deep molten pool, beautiful shape and high welding quality. At the same time, the welding distortion is reduced.
Checking span,welding flange	In production, the hanging plates of the main girder and the end girder are processed together, punched together, and then knock down from end beam and weld to the main girder.
Painting	Two-layer primer, two-layer paint

Packing & Delivery

Steel parts	Steel parts are packed in polythene woven cloth, which can prevent rainwater from directly contacting the crane and protect the painting
Electric parts and hoist	Electric parts are packed by strong plywood crate case, which plays a protective and moistureproof role.

Installation cases

Informations needed to get a price

Basic informations needed of single girder overhead crane

1. Capacity:_ ( max weight of material)
2. Span:_ ( rail center to rail center)
3. Lifting height:_ ( from ground to hook)
4. Crane traveling length:_m
5. What goods will the crane lift?
6. Working environment:
7. Speed requirement:
8. Comtrol method: control pendent, remote control, cabin control ( normally choose controll pendent and remote control)

Customized Single Beam Crane 3 Ton Single Girder Crane Customized 3 Ton Single Girder Crane

prevLow headroom type 5 ton single girder crane

nextsingle girder 2ton workshop use EOT crane design

Customized single girder 3 ton overhead crane

Contact Information